Cisco Systems Switch Cisco Nexus Switch User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Switch Cisco Nexus Switch gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 204
 
Send document comments to nexus7k-docfeedback@cisco.com
3-14
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 3 Installing a Cisco Nexus 7018 Chassis
Installing the Cable Management Assemblies
Figure 3-7 ESD Grounding Ports on the Front of the Cisco Nexus 7018 Chassis
Installing the Cable Management Assemblies
After you have fully installed the Cisco Nexus 7018 device chassis in the rack or cabinet (see the
“Installing the Chassis” section on page 3-6), you can install the cable management assemblies on the
front of the chassis.
To install the cable management assemblies on the Cisco Nexus 7018 device chassis, follow these steps:
Step 1 Attach a lower cable management assembly (800-31343-01) onto the two hooks that protrude from the
lower half of the left rack-mount bracket that is attached to the Cisco Nexus 7018 device chassis, and
loosely fasten the assembly to the chassis with four flat-head M4x10 screws as shown in
Figure 3-8.
192098
1
1 ESD port

   Find Your Products By Category