0
Owner's of the Cisco Systems Switch Cisco Nexus Switch gave it a score of 0 out of 5. Here's how the scores stacked up:
Send document comments to nexus7k-docfeedback@cisco.com
6-37
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 6 Managing the Device Hardware
EPLD Configuration
Fan:
------------------------------------------------------
Fan Model Hw Status
------------------------------------------------------
Fan1(sys_fan1) 0.0 Ok
Fan2(sys_fan2) 0.0 Ok
Fan3(fab_fan1) 0.0 Ok
Fan4(fab_fan2) 0.0 Ok
Fan_in_PS1 -- -- Ok
Fan_in_PS2 -- -- Ok
Fan_in_PS3 -- -- Ok
Fan Air Filter : Absent
switch#
Step 2 Upgrade the EPLD images for the fan tray module by entering the install fan-module slot_number epld
url command.
switch# install fan-module 1 epld bootflash:n7000-s1-epld.4.0.2.img
EPLD image file , built on Fri May 16 20:36:39 2008
EPLD Curr Ver New Ver
-------------------------------------------------------
Fan Controller 0.5 0.7
Fan Controller 0.5 0.7
WARNING: Upgrade process could upto 30 minutes.
Module could be powered down and up.
Programming Fan Module 1 !!
Do you want to continue (y/n) ? [n]
Step 3 Confirm the upgrade by entering Y for yes.
...
Do you want to continue (y/n) ? [n] y
To confirm the EPLD upgrade, see the “Displaying EPLD Versions for a Fan Tray Module” section on
page 6-38.
Displaying the EPLD Versions
These topics describe how to display the EPLD versions on each module in your system and display the
available EPLD versions:
• Displaying EPLD Versions for an I/O or Supervisor Module, page 6-37
• Displaying EPLD Versions for a Fabric Module, page 6-38
• Displaying EPLD Versions for a Fan Tray Module, page 6-38
• Displaying the Available EPLD Versions, page 6-38
Displaying EPLD Versions for an I/O or Supervisor Module
To display all of the current EPLD versions on a specific I/O or supervisor module, use the show version
module
slot_number epld command as shown in Example 14.
Find Your Products By Category
Please Login
