0
Owner's of the Cisco Systems Switch Cisco Nexus Switch gave it a score of 0 out of 5. Here's how the scores stacked up:
Send document comments to nexus7k-docfeedback@cisco.com
3-25
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 3 Installing a Cisco Nexus 7018 Chassis
Installing the Front Door and Air Intake Frame
Figure 3-18 Positioning the Air Intake Frame on the Chassis
Step 9 Fasten the captive screws on the air-intake frame to the chassis and tighten to 95 to 130 N m (11 to 15
in-lbs).
Step 10 On the chassis door, pull the door handle open on one of the two sides of the door until the handle clicks
(the handle clicks when you pull it about 30 degrees).
Step 11 Move the side of the door with the opened handle onto the two hinge pins as shown in Figure 3-19. Make
sure that the top and bottom hinge pins on the hood and hinge bracket fit through the slots on the top and
bottom of that side of the door. Position the door so the hinge pins are located at the ends of the slots.
Note The double-hinge door can be installed and opened on either side. The figures in this procedure show
how to install the door on the left side first, but you can use the instructions to install it on either side.
192230
2
1
1
1
1
1 Ball-headed studs 2 Air-intake frame with holes to be aligned with
the ball-headed studs
Find Your Products By Category
Please Login
