Cisco Systems Switch Cisco Nexus Switch User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Switch Cisco Nexus Switch gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 204
 
Send document comments to nexus7k-docfeedback@cisco.com
3-6
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 3 Installing a Cisco Nexus 7018 Chassis
Installing the Chassis
Step 2 Use a Phillips screwdriver to screw in six M6 x 19 mm or 12-24 x 3/4 in. Phillips screws on each end of
each rail (using a total of 24 screws for both brackets) as shown in
Figure 3-2.
Figure 3-2 Attaching a Bottom-Support Rail to a Rack
Installing the Chassis
This section describes how to install the chassis (transporting and elevating the chassis to the rack using
a mechanical lift, pushing it onto the rack, and then securing it to the rack).
1 For the first and heaviest chassis installed in a
rack, position two bottom-support rails at the
lowest RU on the rack.
2 Allow at least 43.75 inches (111.1 cm)
(25
RU) for each Cisco Nexus 7018 system.
186690
1
1
1
1
2
2
1 Four sets of 6 M6 x 19 mm Phillips screws or
four sets of 6 12-24 x 3/4 in. Phillips screws
2 Adjustable bottom-support rails (2)

   Find Your Products By Category