0
Owner's of the ACS Clothes Dryer ACS Clothes Dryer gave it a score of 0 out of 5. Here's how the scores stacked up:
15, 30, & 60 cfm Compact Dryers Chapter 3: Installation 20 of 51
Drying Hopper Air Trap Considerations
Our exclusive air trap assembly on the top of the drying hopper prevents ambient air from
contaminating the material being dried. To ensure that your unit will operate at peak
efficiency, do the following:
• Keep the material level at the mid point of the air trap
This can be achieved by utilizing a hopper loader or vacuum conveying system to
supply material to the drying system.
Optional Aftercooler
Water-cooled 15 and 30 cfm models use a water-to-air heat exchanger as an aftercooler.
Cooling water is required for this design (3 gpm at 85°F or lower). Return air from the
hopper passes through the air filter to trap fines and dust before entering the heat exchanger.
Installing Water Lines
(Hose and Hose Clamp)
When installing the water lines, ensure that the aftercooler utilizes either tower, chilled or city
water up to 85°F (29°C). Recommended flow rate is three (3 gpm) gallons per minute (11
liters per minute).
3-5 Initial Start-up
Pre-Startup Checks
˛ Check the process and return hoses for tight connections.
˛ Check all companion equipment, such as the drying hopper; verify that the loading
system is ready for operation.
˛ Verify that all dryer electrical connections are tight.
Caution! Clean the rust-preventing oil from inside the drying hopper.
Failure to clean the hopper fouls the desiccant and voids your warranty!
˛ Verify that the dryer’s thermocouple is properly connected in the center of the drying
hopper’s delivery tube.
˛ Verify that the temperature control has been configured for your specified scale (ºF
or ºC).
Find Your Products By Category
Please Login
