0
Owner's of the ACS Clothes Dryer ACS Clothes Dryer gave it a score of 0 out of 5. Here's how the scores stacked up:
15, 30, & 60 cfm Compact Dryers Chapter 2: Functional Description 12 of 51
Chapter 2: Functional Description
2-1 Models Covered in This Manual
This manual provides operation, installation, and maintenance instructions for 15, 30, and 60
cfm dehumidifying dryers. Model numbers are listed on the serial tag. Make sure you know
the model and serial number of your equipment before contacting the manufacturer for parts
or service.
Our dehumidifying mini dryers are designed to generate heated dehumidified air at carefully
controlled temperatures for use in plastic drying systems. Drying systems are sized to meet
the specific requirements stated by the Customer at the time of purchase.
2-2 General Description
Dehumidifying dryers are used to generate very low dew point air heated to a controlled
temperature for drying plastic pellets and regrind.
Our dryers force hot, dry air through resin in a drying hopper, where air picks up moisture
from the material and draws it back to the dryer. In the dryer, a desiccant bed strips moisture
from the air. The dried process air is then re-heated and delivered back into the drying
hopper for more moisture removal.
A small amount of ambient air is introduced into the process air stream to make up for the air
lost during the bed regeneration. Because the process air is typically much drier than the
ambient air, the air mixture maintains drying efficiency at a consistently high level. To
compensate for the humidity content in the air, this dryer is supplied with the proper amount
of desiccant.
Figure 1: Typical Dryer Air Flow Schematic
Drying
Hopper
Filter
(Separates Dust )
High Pressure
Peripheral Blower
Regeneration
Make Up Air
Moisture
Exhaust
Find Your Products By Category
Please Login
