0

Out of 0 Ratings

Owner's of the Nortel Networks Water System Nortel Networks Water System gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 222
 
Chapter 8 User Management 97
SIP Provisioning Client User Guide
[Standard - Nortel Networks Confidential]
system. It must match the called party number that will be sent to the SIP
Application Module on these SimRing calls.
5 Add an alias (not blended alias) that matches the calling party number that
will be sent to the SIP Application Module when the user calls another
blended user. This is the calling party number that is sent to the SIP
Application Module on the SimRing call.
6 If calls from users (non-blended) to blended users are routed to the existing
switching system over a public route, add an alias (not blended alias) that
matches the public charge ID that you intend to provision for the user. If calls
from users (non-blended) to blended users are routed to the existing switching
system over a private route, add an alias (not blended alias) that matches the
private charge ID you intend to provision for the user.
Adding these aliases allows the SIP Application Module to identify the
calling party on SimRing calls that are the result of a call origination, transfer
or redirect from the SIP Application Module back to a blended user's
Preferred Audio Device on the existing switching system.
7 Click Save. A User added successfully message appears.
Figure 56 Blended User added successfully confirmation
8 Click the Customize service package link atthetopoftheformtocreatea
service package containing specific services for the blended user. The Service
package customization window appears (Figure 57).
Note: Blended aliases are per subscriber data and are entered as list of
telephony numbers into the Blended Aliases text box. The blended aliases
must not match any of the normal aliases entered into the Aliases text box
on the same screen.
Note: This step should also be done for all non-blended users that may
call a blended user in order to identify SimRing calls that were originated
by non-blended users.