0

Out of 0 Ratings

Owner's of the Agilent Technologies Computer Hardware U2802A gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 81
 
Getting Started 1
Agilent U2802A 31-Channel Thermocouple Input User’s Guide 13
D. Install the DAQ Hardware Driver
E. Install the Agilent Measurement Manager
1 Verify that you have the hardware driver installed. If not, close all other
applications on your PC and insert the Product Reference CD- ROM into
your CD- ROM drive.
2 Click Measurement Manager on the Agilent Modular Products Installation
Menu to begin the installation.
3 If the installation menu does not appear after a few seconds, go to Start
> Run and type <drive>:\Application\Modular Instruments
Measurement Manager\setup.exe, where drive is your CD-ROM
drive.
4 Click OK to begin installation.
NOTE
Refer to Agilent U2300A Series USB MultifunctionData Acquisition Devices
User’s Guide for DAQ hardware driver installation procedure.
NOTE
Make sure Agilent Measurement Manager version 1.4 and above is installed
before U2802A is used.
U2802A_UG.book Page 13 Tuesday, January 8, 2008 10:24 AM