ADC Clothes Dryer AD-310 User Manual

4.3

Out of 3 Ratings

Owner's of the ADC Clothes Dryer AD-310 gave it a score of 4.3 out of 5. Here's how the scores stacked up:

  • Reliability

    4.5 out of 5

  • Durability

    4.5 out of 5

  • Maintenance

    4.0 out of 5

  • Performance

    4.33 out of 5

  • Ease of Use

    4.33 out of 5
of 119
 
97
WARNING: TO ENSURE THAT THE DRIVE IS NOT UNEXPECTEDLY STARTED, TURN
OFF and LOCK OUT and/or TAG POWER SOURCE BEFORE PROCEEDING.
FAILURE TO OBSERVE THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY.
WARNING: Drive shaft assembly is heavy. IMPROPER HANDLING CAN CAUSE
PERSONAL INJURY.
2. Drive Motor Components
a) Drive Motor Replacement
1) Discontinue electrical service to the dryer.
2) Mark and identify the wires that will be
removed for proper reinstallation.
3) Loosen the turnbuckle and remove V-belts.
Refer to Taper Bushing and Motor Pulley Replacement (Step #3 through Step #6) on
page 98.
6) Remove the bolts securing the motor to the motor mount.
7) Install new motor and secure to motor mount.
8) Reinstall motor pulley and taper bushing.
Refer to Taper Bushing and Motor Pulley Replacement (Step #7 through Step #12) on
page 98.
9) Reinstall V-belts then tighten turnbuckle.
IMPORTANT: DO NOT OVER TIGHTEN TURNBUCKLE.
10) Rewire the new drive motor in the same order as the wiring from the motor that was removed.
Diagram is usually affixed to the side of the motor.
11) Reestablish electrical service to the dryer.
b) V-Belt Replacement
1) Discontinue electrical service to the dryer.
2) Loosen turnbuckle and remove V-belts.
4) Mark the inside of the shaft before
removing the taper bushing (for proper
reinstallation).
5) Remove the taper bushing and motor
pulley.

   Find Your Products By Category