ADC Clothes Dryer AD-115ES User Manual

0

Out of 0 Ratings

Owner's of the ADC Clothes Dryer AD-115ES gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 50
 
4 American Dryer Corp. 113202-10
MAXIMUM CAPACITY (DRY WEIGHT) 115 lb
52.16 kg
TUMBLER DIAMETER 42”
106.68 cm
TUMBLER DEPTH 41-1/4”
104.78 cm
TUMBLER VOLUME 33.10 cu ft
937.29 L
TUMBLER/DRIVE MOTOR 3/4 hp
0.56 kW
BLOWER/FAN MOTOR 3 hp
2.24 kW
DOOR OPENING (DIAMETER) 31-3/8”
79.69 cm
DOOR SILL HEIGHT 27-1/2”
69.85 cm
WATER CONNECTION 3/4”-11.5 NH
(North America)
3/4” B.S.P.T.
(Outside North America)
DRYERS PER 20’/40’ CONTAINER 4 / 8
DRYERS PER 48’/53’ TRUCK 9 / 10
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 1,260 lb
571.53 kg
APPROXIMATE SHIPPING WEIGHT 1,400 lb
635.03 kg
AIRFLOW
60 Hz
2,100 cfm
59.47 cmm
50 Hz
1,750 cfm
49.55 cmm
HEAT INPUT 343,000 Btu/hr
86,435 kcal/hr
EXHAUST CONNECTION (DIAMETER) 14”
35.56 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
INLET PIPE CONNECTION 1” F.N.P.T.
1” F.B.S.P.T.
(CE and Australia Only)
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 1,260 lb
571.53 kg
APPROXIMATE SHIPPING WEIGHT 1,400 lb
635.03 kg
AIRFLOW
60 Hz
2,100 cfm
59.47 cmm
50 Hz
1,750 cfm
49.55 cmm
EXHAUST CONNECTION (DIAMETER) 14”
35.56 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
OVEN SIZE
kW Btu/hr
kcal/hr
60 204,700
51,600
72 245,700
61,900
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 1,555 lb
705.34 kg
APPROXIMATE SHIPPING WEIGHT 1,695 lb
768.84 kg
AIRFLOW
60 Hz
2,100 cfm
59.47 cmm
50 Hz
1,750 cfm
49.55 cmm
STEAM CONSUMPTION 375 lb/hr
170.10 kg/hr
OPERATING STEAM PRESSURE 125 psi max
8.62 bar
EXHAUST CONNECTION (DIAMETER) 14”
35.56 cm
COMPRESSED AIR CONNECTION 1/4” Quick Connection
COMPRESSED AIR VOLUME 0.75 cfh
0.02 cmh
BOILER HORSEPOWER (NORMAL LOAD) 11 Bhp
SUPPLY CONNECTION 1-1/4” F.N.P.T.
RETURN CONNECTION 1-1/4” F.N.P.T.
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Electric
Steam
Gas
Shaded areas are stated in metric equivalents 5/26/06
IMPORTANT: Steam dryers must be provided with a clean, dry, regulated 80 psi +/- 10 psi (5.51
bar +/- 0.69 bar) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.

   Find Your Products By Category