3Com Gas Grill Extreme Series User Manual

0

Out of 0 Ratings

Owner's of the 3Com Gas Grill Extreme Series gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 12
 
8
Alarm Feature Programming (continued)
LED Flash/
Chirp
(Default Setting)
”
ff
O“
psri
h
C
”nO“ psrihC
1
Manual Arming
2
Automatic Arming
without Door Locking
Ignition On/Off with
Door Lock/Unlock
Ignition On/Off without
Door Lock/Unlock
“On”
m
r
a
eR
o
tu
A
“Off”
mrae
R
ot
u
A
6
7
Manual Car-Jack “On”
”ffO
“
g
n
i
kcaJ-
r
aC
8
Automatic Arming
with Door Locks
HC4 Red/White Wire
(-) Domelight Output
HC4 Red/White Wire
(-) 2nd Unlock Output
HC4 Red/White Wire
(-) Channel 3 Output
Automatic Car-Jack “On”
3
4
5
9
1
2
6
7
8
3
4
5
9
Alarm/Keyless
Entry Mode
Keyless Entry
Only Mode
(No Alarm Functions)
(No Carjacking Functions)
Press
Valet
Switch
One Chirp
Two Chirps
Three Chirps
Trunk Release
Disarm On
Trunk Release
Disarm Off
.8 Sec Door Lock/
Unlock Output
3.5 Sec Door Lock/
Unlock Output
.8 Sec Double
Unlock Output
Press TX Button
Press TX Button
Press TX Button
10
10
HC4 Brown Wire
Siren Output
HC4 Brown Wire
Pulsed Siren Output
HC4 Brown Wire
Horn Output
11
11
Instant Door
Ajar Warning
Door Ajar Warning
with 45 Second Delay
12
12
Standard Horn
Pulse Output
Press TX Button
“SOS” Type
S-S-S - L-L-L - S-S-S
S-L-S-L
4-chirp S-S-S-L
5-chirp S-M-L-S-M-L
6-chirp SS - L - S-S
Turn On the Ignition
3 long chirps will confirm exit of the programming
mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the
programming mode.
Step 4: Exit Program Mode
3X
Turn the ignition switch from the
OFF position to the ON position 3
times leaving it in the Off position
the third time.
Step 1
Press and release the ( )
button for 2 seconds. You will hear
1 long siren/horn chirp. You are now
in the “Primary Trigger Shock
Sensor Test mode”.
Step 3
Before 15 seconds has passed,
push and release the valet switch 6
times. Hold the button down on the
6th press until 3 short chirp/beeps
and 1 long chirp/beep is heard then
release it.
5X + 1X (Hold)
Step 2
Shock Sensor Testing and Adjustment

   Find Your Products By Category